Detailed information

application
It is suitable for the mixing of powder and powder in the pharmaceutical, chemical, food and other industries, and the granulation of powder and binder.

Characteristics

1. The whole machine is controlled by programmable program (optional man-machine interface), system-process, to ensure stable quality, manual operation, easy to explore process parameters and processes.
2. The mixing paddle and the cutting knife are all controlled by frequency conversion, and the easy to control particle size.
3. Rotating the shaft cavity to insulate and seal, eliminating the phenomenon of dust adhesion. With automatic cleaning.
4. Conical trough to make the material roll evenly. The bottom of the tank is a sandwich with a built-in water-cooled circulation system. The constant temperature performance is better than that of the general air-cooling system, which improves the particle quality.
5, the lid is automatically raised, the discharge port is matched with the drying equipment, and the large model comes with an escalator for easy operation.
6, with the blade lift system, is more conducive to the cleaning of the blade and pot.
7. The discharge port is a circular arc type, which eliminates the dead angle.

Process flow

1. The artificial feeding (standard)
2. By gravity and closed feed system, or via vacuum (option)
3. The cone material slot (standard) speed can be adjusted
4. Z impeller speed can be adjusted (standard)
5. Cutting knife shape variable (standard), speed is adjustable
6. The lid can promote mobile, with Windows (HLSG - 200-400 standard)
7. By artificial open the lid, there are Windows (HLSG - 50 for standard parts)
8. The filter bag (standard)
9. GIP - field of high pressure cleaning metal filter bag (option)
10. All kinds of feeding mouth and glue injection system (option)
11. Used for material slot, discharging mouth, impeller sealing and cutting knife, GIP cleaning system of filter bag (option)

The whole process by mixing, granulating of two processes.

1. the powder material from material cone hopper above into the pot, after being closed hopper in the mixed stirring paddle, powder rotary motion 1n a container, material along the direction of the conical wall changes at the same time, gradually produce liquid bridge. In blade and compared.in addition to material extrusion, under the action of friction, kneading, material gradually into loose material. Then, open the discharging door, wet particles in the blade under the action of centrifugal force to promote the hopper
2. so the aggregate structure of soft material not by forcing extruding and granulating, but by granulating knives cutting, soft material under half flow state was cut into small and uniform particle, realized the material change to each other.

Sketch of Flow Chart

Technical parameters